30 tons of mobile modified asphalt equipment
 |
 |
Equipment Name: Mobile modified asphalt equipment
Equipment Model: HT-GSY-30
Approved production rate: 30t / h (under standard industrial control)
Working voltage: 380V / 50HZ
Applicable to the production type: on-site docking production
Overall dimensions (length × width × height): 11.2m × 2.6m × 2.8m
Control room: 3m × 2.6m × 2.5m
Equipment Features: Adopting frame structure, convenient for transportation, suitable for docking with production site.
Scope: SBS, SBR, MAC, PE, EVA and other types of modified asphalt, the production of SBS modified asphalt products fully meet the JTGF40-2004 standard.
Modified asphalt equipment, the safe use of Operating instructions:
1, Place: Modified asphalt equipment should be placed in a flat place, the front axle shaft wheel should be fixed with sleepers, overhead tires, so that the machine does not move at work.
2, regularly check whether the deformation of the mixer blades, screws loose phenomenon.
3, Check whether the direction of mixing drum and arrow consistent, if not, please replace the positive and negative wiring.
4, before the power to check, and then empty the test run, check for leakage phenomenon, check the mixing bucket empty, the normal rate is empty about 3 times faster than the full car, if the speed is wrong, you should check the parking .
5, after the asphalt material is stirred down the best one hour shut down, the mixing barrel is expected to be clear and clean, pour water, the mortar clean. And then the water is discharged, remember the end of the bucket may not have water to prevent the formula change, as well as the page and other areas of rust.
Equipment Model: HT-GSY-30
Approved production rate: 30t / h (under standard industrial control)
Working voltage: 380V / 50HZ
Applicable to the production type: on-site docking production
Overall dimensions (length × width × height): 11.2m × 2.6m × 2.8m
Control room: 3m × 2.6m × 2.5m
Equipment Features: Adopting frame structure, convenient for transportation, suitable for docking with production site.
Scope: SBS, SBR, MAC, PE, EVA and other types of modified asphalt, the production of SBS modified asphalt products fully meet the JTGF40-2004 standard.
Modified asphalt equipment, the safe use of Operating instructions:
1, Place: Modified asphalt equipment should be placed in a flat place, the front axle shaft wheel should be fixed with sleepers, overhead tires, so that the machine does not move at work.
2, regularly check whether the deformation of the mixer blades, screws loose phenomenon.
3, Check whether the direction of mixing drum and arrow consistent, if not, please replace the positive and negative wiring.
4, before the power to check, and then empty the test run, check for leakage phenomenon, check the mixing bucket empty, the normal rate is empty about 3 times faster than the full car, if the speed is wrong, you should check the parking .
5, after the asphalt material is stirred down the best one hour shut down, the mixing barrel is expected to be clear and clean, pour water, the mortar clean. And then the water is discharged, remember the end of the bucket may not have water to prevent the formula change, as well as the page and other areas of rust.
